erreur

Create new topics, add your comment, remark, bugs...
Post Reply
enim
Posts: 5
Joined: Tue Dec 22, 2009 11:11 am

erreur

Post by enim » Tue Dec 22, 2009 11:30 am

bonjour monsieur
quand j'essaye d'executer le programme servo_ADC il engendre l'erreur suivante: build genmake1138
voila une copie de mon erreur sur matlab
merci pour votre comprhénsion

C30 Compiler found
Warning: dsPICdrivers.mdl, line 48: block_diagram does not have a parameter named
'CovForceBlockReductionOff'.
> In general\private\openmdl at 13
In open at 153
In uiopen at 196
Warning: dsPICdrivers.mdl, line 54: block_diagram does not have a parameter named
'CovExternalEMLEnable'.
> In general\private\openmdl at 13
In open at 153
In uiopen at 196
Warning: Error evaluating 'LoadFcn' callback of Master block (mask) 'Master'. Error using ==>
dsPIC_ConfigRTWOption at 107
The *System Target File must be defined to dsPIC Real Time workshop (Simulation ==>
Configuration Parameters ==> Real Time workshop.
> In C:\Documents and Settings\Administrateur\Bureau\install dspic\blocks\dsPIC_UART_TX_Labview_Matlab_callback.p>dsPIC_UART_TX_Labview_Matlab_callback at 36
In general\private\openmdl at 13
In open at 153
In uiopen at 196
Warning: In instantiating linked block 'Servo_ADC_filter/ADC Input' : Invalid setting in dsPIC :
ADC10 block (mask) 'ADC Input' for parameter 'OutFormatBitspopup'.
> In C:\Documents and Settings\Administrateur\Bureau\install dspic\blocks\dsPIC_UART_TX_Labview_Matlab_callback.p>dsPIC_UART_TX_Labview_Matlab_callback at 36
In general\private\openmdl at 13
In open at 153
In uiopen at 196
PTC30 Compiler found
C30 Compiler found
C30 Compiler found
C30 Compiler found
### Starting Real-Time Workshop build procedure for model: Servo_ADC_filter
### Generating code into build directory: C:\Documents and Settings\Administrateur\Bureau\examples\Servo_ADC_filter_dspic\sources
PPNumber of I/O PINs used : 4
TPTPTTPNumber of I/O PINs used : 4
TPNumber of I/O PINs used : 4
TTTPTPTPTTPNumber of I/O PINs used : 4
TPTWarning: Source 'Servo_ADC_filter/ADC Input' specifies that its sample time (-1) is
back-inherited. You should explicitly specify the sample time of sources. You can disable this
diagnostic by setting the 'Source block specifies -1 sample time' diagnostic to 'none' in the
Sample Time group on the Diagnostics pane of the Configuration Parameters dialog box.
Warning: Parameter precision loss occurred for 'Value'. The parameter's value cannot be
represented exactly using the run-time data type. A small quantization error has occurred. You
can control this diagnostic on the Diagnostics pane of the Configuration Parameters dialog. This
originated from 'Servo_ADC_filter/Constant1'.
Warning: Parameter precision loss occurred for 'Gain'. The parameter's value cannot be
represented exactly using the run-time data type. A small quantization error has occurred. You
can control this diagnostic on the Diagnostics pane of the Configuration Parameters dialog. This
originated from 'Servo_ADC_filter/Gain'.
### Invoking Target Language Compiler on Servo_ADC_filter.rtw
tlc
-r
C:\Documents and Settings\Administrateur\Bureau\examples\Servo_ADC_filter_dspic\sources\Servo_ADC_filter.rtw
C:\Documents and Settings\Administrateur\Bureau\install dspic\dspic\dspic.tlc
-OC:\Documents and Settings\Administrateur\Bureau\examples\Servo_ADC_filter_dspic\sources
-IC:\Documents and Settings\Administrateur\Bureau\install dspic\dspic
-IC:\Documents and Settings\Administrateur\Bureau\install dspic\blocks
-IC:\Documents and Settings\Administrateur\Bureau\examples\Servo_ADC_filter_dspic\sources\tlc
-IC:\Program Files\MATLAB\R2008a\rtw\c\tlc\mw
-IC:\Program Files\MATLAB\R2008a\rtw\c\tlc\lib
-IC:\Program Files\MATLAB\R2008a\rtw\c\tlc\blocks
-IC:\Program Files\MATLAB\R2008a\rtw\c\tlc\fixpt
-IC:\Program Files\MATLAB\R2008a\stateflow\c\tlc
-aEnforceIntegerDowncast=1
-aFoldNonRolledExpr=1
-aInlineInvariantSignals=0
-aInlineParameters=0
-aLocalBlockOutputs=1
-aRollThreshold=5
-aZeroInternalMemoryAtStartup=1
-aZeroExternalMemoryAtStartup=1
-aInitFltsAndDblsToZero=1
-aGenerateReport=0
-aGenCodeOnly=0
-aRTWVerbose=1
-aIncludeHyperlinkInReport=0
-aLaunchReport=0
-aGenerateTraceInfo=0
-aForceParamTrailComments=0
-aGenerateComments=1
-aIgnoreCustomStorageClasses=0
-aIncHierarchyInIds=0
-aMaxRTWIdLen=31
-aShowEliminatedStatements=0
-aIncDataTypeInIds=0
-aInsertBlockDesc=0
-aSimulinkBlockComments=1
-aInlinedPrmAccess="Literals"
-aTargetFcnLib="ansi_tfl_tmw.mat"
-aGenFloatMathFcnCalls="ANSI_C"
-aIsPILTarget=0
-aIncludeMdlTerminateFcn=0
-aCombineOutputUpdateFcns=1
-aSuppressErrorStatus=1
-aERTCustomFileBanners=1
-aLogVarNameModifier="rt_"
-aGenerateFullHeader=1
-aGenerateSampleERTMain=0
-aMatFileLogging=0
-aMultiInstanceERTCode=0
-aPurelyIntegerCode=0
-aPortableWordSizes=0
-aGenerateErtSFunction=0
-aGenerateASAP2=0
-aExtMode=0
-aExtModeStaticAlloc=0
-aExtModeStaticAllocSize=1000000
-aExtModeTransport=0
-aExtModeTesting=0
-aInlinedParameterPlacement="NonHierarchical"
-aTargetOS="BareBoardExample"
-aMultiInstanceErrorCode="Error"
-aRateGroupingCode=1
-aRTWCAPISignals=0
-aRTWCAPIParams=0
-aRootIOStructures=0
-aERTCustomFileTemplate="dsPIC_main.tlc"
-aGMAKE_PLACE="C:\PROGRA~1\MATLAB\R2006a\rtw\bin\win32\gmake"
-aOPTIM_GCC="-mcpu=30f3012 -O3 -fschedule-insns -fschedule-insns2"
-aLDFLAGS="-t --report-mem -Map ../untitled.map --heap 0 -cref"
-aLDPICTYPE="-T C:\PROGRA~1\MICROC~1\MPLABC~1\support\dsPIC30F\gld\p30f3012.gld"
-aLDLIBPIC="C:\PROGRA~1\MICROC~1\MPLABC~1\lib\libpic30-coff.a C:\PROGRA~1\MICROC~1\MPLABC~1\lib\dsPIC30F\libp30f3012-coff.a C:\PROGRA~1\MICROC~1\MPLABC~1\lib\libc-coff.a C:\PROGRA~1\MICROC~1\MPLABC~1\lib\libm-coff.a"
-aPIC_INCLUDES="-I C:\PROGRA~1\MICROC~1\MPLABC~1\include"
-aPIC_REF="30f3012"
-aGCCPATH=""
-aGenerateTraceInfo=0
-p10000


### Loading TLC function libraries

.....
### Initial pass through model to cache user defined code
.
### Caching model source code
...............
### Writing main
### Writing header file Servo_ADC_filter_types.h
.
### Writing header file Servo_ADC_filter.h
### Writing source file Servo_ADC_filter.c
.
### Writing header file Servo_ADC_filter_private.h
### Writing source file Servo_ADC_filter_data.c
### Writing header file autobuild.h
.
### Writing source file Servo_ADC_filter_main.c
### TLC code generation complete.
### Evaluating PostCodeGenCommand specified in the model

----------------------------------------------------
----------------------------------------------------
Embedded Coder for dsPIC V3.1(17-Nov-2009) for Matlab R2009a.


Licence Accorded to Demonstration Version
RTWdsPIC@kerhuel.eu
Author : Lubin KERHUEL
WEBSITE : http://www.kerhuel.eu/wiki

SIRENE : 503 920 456
SIRET : 503 920 456 00012

Facturation to : Demo
Demo
Lubin KERHUEL
18 avenue Joseph Lieutaud
13260 Cassis
FRANCE

----------------------------------------------------
Check updates and new informations at : www.kerhuel.eu
----------------------------------------------------

.
### Processing Template Makefile: C:\Documents and Settings\Administrateur\Bureau\install dspic\dspic\dspic_pic30_gcc.tmf
### Servo_ADC_filter.mk which is generated from C:\Documents and Settings\Administrateur\Bureau\install dspic\dspic\dspic_pic30_gcc.tmf is up to date
### Building Servo_ADC_filter: .\Servo_ADC_filter.bat

C:\Documents and Settings\Administrateur\Bureau\examples\Servo_ADC_filter_dspic\sources>set MATLAB=C:\Program Files\MATLAB\R2008a

C:\Documents and Settings\Administrateur\Bureau\examples\Servo_ADC_filter_dspic\sources>"C:\PROGRA~1\MATLAB\R2006a\rtw\bin\win32\gmake" -f Servo_ADC_filter.mk GENERATE_REPORT=0 MULTI_INSTANCE_CODE=0 PORTABLE_WORDSIZES=0 GENERATE_ASAP2=0 TMW_EXTMODE_TESTING=0
Le chemin d'accŠs sp‚cifi‚ est introuvable.
### Real-Time Workshop build procedure for model
: 'Servo_ADC_filter' aborted due to an error.

LubinKerhuel
Site Admin - Expert
Posts: 616
Joined: Wed Mar 07, 2007 11:23 pm
Location: Bayonne- France
Contact:

Re: erreur

Post by LubinKerhuel » Tue Dec 22, 2009 12:37 pm

essayer de cliquer, avant de compiler sur un block jaune qui permet de configurer le modèle, et corrige les chemins d'accés aux fichiers/compilateurs...

enim
Posts: 5
Joined: Tue Dec 22, 2009 11:11 am

Re: erreur

Post by enim » Tue Dec 22, 2009 4:24 pm

bonjour j'ai changé et voila ce qu'il m'ecrit:
pouvez vous m'aider SVP


### Starting Real-Time Workshop build procedure for model: Servo_ADC_filter
### Generating code into build directory: C:\Documents and Settings\Administrateur\Bureau\Servo_ADC_filter_dspic\sources
PNumber of I/O PINs used : 4
TTPNumber of I/O PINs used : 4
TPNumber of I/O PINs used : 4
TPNumber of I/O PINs used : 4
TTPTPTWarning: Source 'Servo_ADC_filter/ADC Input' specifies that its sample time (-1) is back-inherited. You should explicitly specify the sample time of
sources. You can disable this diagnostic by setting the 'Source block specifies -1 sample time' diagnostic to 'none' in the Sample Time group on the
Diagnostics pane of the Configuration Parameters dialog box.
Warning: Parameter precision loss occurred for 'Value'. The parameter's value cannot be represented exactly using the run-time data type. A small
quantization error has occurred. You can control this diagnostic on the Diagnostics pane of the Configuration Parameters dialog. This originated from
'Servo_ADC_filter/Constant1'.
Warning: Parameter precision loss occurred for 'Gain'. The parameter's value cannot be represented exactly using the run-time data type. A small
quantization error has occurred. You can control this diagnostic on the Diagnostics pane of the Configuration Parameters dialog. This originated from
'Servo_ADC_filter/Gain'.
### Invoking Target Language Compiler on Servo_ADC_filter.rtw
tlc
-r
C:\Documents and Settings\Administrateur\Bureau\Servo_ADC_filter_dspic\sources\Servo_ADC_filter.rtw
C:\Documents and Settings\Administrateur\Bureau\dspic\dspic.tlc
-OC:\Documents and Settings\Administrateur\Bureau\Servo_ADC_filter_dspic\sources
-IC:\Documents and Settings\Administrateur\Bureau\dspic
-IC:\Documents and Settings\Administrateur\Bureau\blocks
-IC:\Documents and Settings\Administrateur\Bureau\Servo_ADC_filter_dspic\sources\tlc
-IC:\Program Files\MATLAB\R2008a\rtw\c\tlc\mw
-IC:\Program Files\MATLAB\R2008a\rtw\c\tlc\lib
-IC:\Program Files\MATLAB\R2008a\rtw\c\tlc\blocks
-IC:\Program Files\MATLAB\R2008a\rtw\c\tlc\fixpt
-IC:\Program Files\MATLAB\R2008a\stateflow\c\tlc
-aEnforceIntegerDowncast=0
-aFoldNonRolledExpr=1
-aInlineInvariantSignals=1
-aInlineParameters=1
-aLocalBlockOutputs=1
-aRollThreshold=5
-aZeroInternalMemoryAtStartup=0
-aZeroExternalMemoryAtStartup=0
-aInitFltsAndDblsToZero=0
-aGenerateReport=0
-aGenCodeOnly=0
-aRTWVerbose=1
-aIncludeHyperlinkInReport=0
-aLaunchReport=0
-aGenerateTraceInfo=0
-aForceParamTrailComments=0
-aGenerateComments=1
-aIgnoreCustomStorageClasses=0
-aIncHierarchyInIds=0
-aMaxRTWIdLen=31
-aShowEliminatedStatements=0
-aIncDataTypeInIds=0
-aInsertBlockDesc=0
-aSimulinkBlockComments=1
-aInlinedPrmAccess="Literals"
-aTargetFcnLib="ansi_tfl_table_tmw.mat"
-aGenFloatMathFcnCalls="ANSI_C"
-aIsPILTarget=0
-aIncludeMdlTerminateFcn=0
-aCombineOutputUpdateFcns=1
-aSuppressErrorStatus=1
-aERTCustomFileBanners=1
-aLogVarNameModifier="rt_"
-aGenerateFullHeader=1
-aGenerateSampleERTMain=0
-aMatFileLogging=0
-aMultiInstanceERTCode=0
-aPurelyIntegerCode=0
-aPortableWordSizes=0
-aGenerateErtSFunction=0
-aGenerateASAP2=0
-aExtMode=0
-aExtModeStaticAlloc=0
-aExtModeStaticAllocSize=1000000
-aExtModeTransport=0
-aExtModeTesting=0
-aInlinedParameterPlacement="NonHierarchical"
-aTargetOS="BareBoardExample"
-aMultiInstanceErrorCode="Error"
-aRateGroupingCode=1
-aRTWCAPISignals=0
-aRTWCAPIParams=0
-aRootIOStructures=0
-aERTCustomFileTemplate="dsPIC_main.tlc"
-aGMAKE_PLACE="C:\Program Files\MATLAB\R2008a\bin\win32\gmake"
-aOPTIM_GCC="-mcpu=30f3012 -O3 -fschedule-insns -fschedule-insns2"
-aLDFLAGS="-t --report-mem -Map ../untitled.map --heap 0 -cref"
-aLDPICTYPE="C:\Program Files\Microchip\MPLAB C30\support\dsPIC30F\gld\p30f3012.gld"
-aLDLIBPIC="C:\Program Files\Microchip\MPLAB C30\lib\libpic30-coff.a C:\Program Files\Microchip\MPLAB C30\lib\libp30f3012-coff.a C:\Program Files\Microchip\MPLAB C30\lib\libc-coff.a C:\Program Files\Microchip\MPLAB C30\lib\libm-coff.a"
-aPIC_INCLUDES="C:\Program Files\Microchip\MPLAB C30\include"
-aPIC_REF="30f3012"
-aGCCPATH="'C:\Program Files\Microchip\MPLAB C30\bin\\'"
-aGenerateTraceInfo=0
-p10000


### Loading TLC function libraries

.....
### Initial pass through model to cache user defined code
.
### Caching model source code
..............
### Writing code interface description file codeInfo.mat

### Writing main
.
### Writing header file Servo_ADC_filter_types.h
### Writing header file Servo_ADC_filter.h
### Writing source file Servo_ADC_filter.c
.
### Writing header file Servo_ADC_filter_private.h
### Writing header file autobuild.h
.
### Writing source file Servo_ADC_filter_main.c
### TLC code generation complete.
### Evaluating PostCodeGenCommand specified in the model

----------------------------------------------------
----------------------------------------------------
Embedded Coder for dsPIC V3.0b(02-Oct-2009) for Matlab R2008a.


Licence Accorded to Demonstration Version
RTWdsPIC@kerhuel.eu
Author : Lubin KERHUEL
WEBSITE : http://www.kerhuel.eu/wiki

SIRENE : 503 920 456
SIRET : 503 920 456 00012

Facturation to : Demo
Demo
Lubin KERHUEL
18 avenue Joseph Lieutaud
13260 Cassis
FRANCE

----------------------------------------------------
Check updates and new informations at : www.kerhuel.eu
----------------------------------------------------

.
### Processing Template Makefile: C:\Documents and Settings\Administrateur\Bureau\dspic\dspic_pic30_gcc.tmf
### Creating Servo_ADC_filter.mk from C:\Documents and Settings\Administrateur\Bureau\dspic\dspic_pic30_gcc.tmf
### Building Servo_ADC_filter: .\Servo_ADC_filter.bat

C:\Documents and Settings\Administrateur\Bureau\Servo_ADC_filter_dspic\sources>set MATLAB=C:\Program Files\MATLAB\R2008a

C:\Documents and Settings\Administrateur\Bureau\Servo_ADC_filter_dspic\sources>"C:\Program Files\MATLAB\R2008a\bin\win32\gmake" -f Servo_ADC_filter.mk GENERATE_REPORT=0 MULTI_INSTANCE_CODE=0 PORTABLE_WORDSIZES=0 GENERATE_ASAP2=0 TMW_EXTMODE_TESTING=0
C:\Program Files\Microchip\MPLAB C30\bin\\pic30-gcc -c -mcpu=30f3012 -O3 -fschedule-insns -fschedule-insns2 -O -I. -I..\.. -IC:\PROGRA~1\MATLAB\R2008a/simulink/include -IC:\PROGRA~1\MATLAB\R2008a/extern/include -IC:\PROGRA~1\MATLAB\R2008a/rtw/c/src -IC:\PROGRA~1\MATLAB\R2008a/rtw/c/ert -IC:\PROGRA~1\MATLAB\R2008a/rtw/c/src/ext_mode/common -IC:\DOCUME~1\ADMINI~1\Bureau\SERVO_~1\sources -IC:\DOCUME~1\ADMINI~1\Bureau -IC:\PROGRA~1\MATLAB\R2008a\rtw\c\libsrc C:\Program Files\Microchip\MPLAB C30\include Servo_ADC_filter_main.c
pic30-coff-gcc: C:\Program: No such file or directory
pic30-coff-gcc: Files\Microchip\MPLAB: No such file or directory
pic30-coff-gcc: C30\include: No such file or directory
gmake: *** [Servo_ADC_filter_main.o] Error 255
### Real-Time Workshop build procedure for model: 'Servo_ADC_filter' aborted due to an error.
C30 Compiler found
C30 Compiler found

Post Reply

Who is online

Users browsing this forum: No registered users and 30 guests