remappable Pin
Posted: Wed May 13, 2009 4:16 am
Hi Lumbin,
I need to select the I/O, so to configure the UART function on some Pins of a 33FJ128GP804.
I plan to use a C call function, called one time, to initialize the I/O mapping MUX.
Before to start I would appreciate to know, if you have a better/other way or a small exemple ?
Thank you.
I need to select the I/O, so to configure the UART function on some Pins of a 33FJ128GP804.
I plan to use a C call function, called one time, to initialize the I/O mapping MUX.
Before to start I would appreciate to know, if you have a better/other way or a small exemple ?
Thank you.